30V 10A 20A Battery Pack Aging Machine

Description

Model Number:Zoway-BT3020
1. Compliance:CE Certified
2. Warranty:2 Year limited warranty with lifetime support
3. Delivery Time:In Stock

Email: imani@batterypackassembly.com
Tel:+86 13174506016
WhatsApp:+86 13174506016
WeChat:+86 18659217588

Content

Email: imani@batterypackassembly.com

Introduction

This Battery Tester is mainly used for lithium battery charging and discharging cycle test. The test items include battery charging protection voltage, discharging protection voltage, capacity, etc. The equipment has four test steps: charging, discharging, shelving and cycling. By editing the corresponding step, the battery can be tested according to the set process.

The basic performance of the tester

1. Charging and discharging functions

It has the functions of constant current and voltage charging and constant current discharging, charging and discharging batteries and recording the capacity of batteries.

2. Charge-discharge interface

It fully meets the requirements of charging and discharging ports and charging and discharging ports of battery packages, namely, two wires (P + P-) and three wires (P + P - C-). At the same time, the electric tool battery (CH+P+P-) which can aging positive plate charging protection and negative plate discharging protection can be used.

3. Check Voltage Protection

By charging and discharging the batteries, it can be detected whether the charging protection and discharging protection of the batteries play a role.

4. Safety Protection

Anti-reversal protection function; upper and lower limits of voltage setting protection; safe discharge current protection.

5. Online Mode

If the instrument is single or less than 5, PC can be connected through serial port.

More than 5 computers are connected by network mode. PC computer can control less than 60 instruments by only providing a network port.

6. Control System

The software system adopts classical mature C/S mode. There are two modes of communication: serial port and network. Serial port can realize accurate communication of several instruments in short distance, and network can realize accurate communication of many instruments in long distance.

7. Management software

Based on Windows operating interface, using SQL database to store test data, it is very convenient for staff to inquire and export data online. According to the battery bar code, time and equipment number, the aging curve of charge and discharge can be viewed, and the curve can be derived at the same time.

Specifications

Input power	AC 220V ±10% / 50Hz
Voltage	Per Channel Voltage Range	5-30V
Accuracy	±(0.2% of reading + 0.2% of range)
Current	Per Channel Current Range	50~10000mA
Accuracy	±(0.2% of reading + 0.2% of range)
Discharge range	50~20000mA
Accuracy	±(0.2% of reading + 0.2% of range)
Charging	CV cut-off current	Minium: 50mA
Capacity	Accuracy	±1‰
Power	Per Channel Output Power	600W
Time	Current Response Time	The Current gets to 20A Hardware Response Time is 2s
Step Time Range	0-999 hours/step
Data recording interval	5S
Middle machine version	1.1series
Charge	Charge Mode	Constant Current Charge,Constant Voltage Charge, CC-CV Charge ,CP-Charge
End Condition	Voltage,Current,Relative Time,Capacity,
Discharge	Discharge Mode	Constant Current Discharge CP-D CR-D
End Condition	Current,Current,Relative Time,Capacity,
Cycle	Loop Measure Range	1-999times
Max Steps Per Loop	100
Voltage and Current Testing Sample	4-wire connecting
Data Management	MySQL Database
Communication Means	TCP/IP Protocol
Data Output	EXCEL,TXT
Communication Interface	Ethernet Port
Working Temperature Range	0℃~40℃
Storage Temperature Range	-10℃~50℃
Working Environment Relative Humidity Range	30% ~ 70% RH
Storage Environment Relative Humidity Range	30% ~ 70% RH